TÜM ürünler

Ana sayfa / Ürünler / Çelik Fren Pabucu / VL200 Old Generation Brake Shoe

VL200 Old Generation Brake Shoe

Name: VL200 Old Generation Brake Shoe
Rating: 5 (99 reviews)

Part Number： VL200 Old Generation

Product Size： 410*200mm

Number of rivet holes: 28

Product OE number: 0270.828-7

ÖNCEKİ：VL225 Eski Nesil Fren Pabucu
SONRAKİ：VL225 New Generation Brake Shoe

Bize Ulaşın

OE 0270.828-7 Old Generation

VL200 Old Generation Brake Shoe

Part VL200 410 × 200 mm 28 Rivet Holes

VL200 · classic series

The VL200 Old Generation Brake Shoe (OE 0270.828-7) is a time-tested braking solution trusted by fleet operators worldwide. Engineered with a reliable 410mm by 200mm footprint and 28 rivet holes, this shoe delivers consistent and dependable braking performance for heavy-duty commercial vehicles. Constructed from high-grade steel with proven metallurgy, it offers excellent structural integrity and thermal management for everyday operations. The Old Generation design incorporates decades of field experience, providing smooth engagement and predictable stopping power across a wide range of operating conditions. Backed by extensive real-world validation, the VL200 Old Generation remains the preferred choice for fleets prioritizing durability, straightforward maintenance, and cost-effective operation in demanding transport environments.

Core Advantages

Proven 28-hole design for balanced force
High-grade steel for long-term durability
Consistent fade resistance up to 450°C
Compatible with standard truck axles
Reduced drum wear with optimized contact

Technical Data

Size: 410 × 200 mm
Rivet holes: 28 (dia. 10.0mm)
Material: Steel (standard grade)
Friction coeff: 0.38 – 0.43
Max temp: 450°C

Vehicle Fitment

Heavy-duty trucks
Commercial trailers
Bus and coach fleets
Construction vehicles
Agricultural machinery

Applications

The VL200 Old Generation is widely used in heavy-duty trucks, commercial trailers, buses, and off-highway equipment where proven reliability is essential. Its 28-rivet configuration ensures even pressure distribution across the brake drum, making it ideal for long-haul operations, regional distribution, and demanding off-highway applications. Commonly specified as original equipment for many commercial vehicle platforms, this shoe also serves as a dependable replacement option for fleets seeking consistent performance and low total cost of ownership.

Service Notes: Inspect drums for scoring before installation. Torque rivets to 35–40 N·m using a cross pattern. Allow 200–300 km of progressive braking for proper bedding. Inspect lining thickness at 12,000 km intervals; replace when worn below 8mm.

Common Questions

Q: Is the VL200 Old Generation still available for new vehicles?

The VL200 Old Generation is primarily offered for existing fleet replacements and legacy vehicle applications. New vehicle platforms typically use the New Generation series.

Q: Can I upgrade from Old Generation to New Generation?

Yes, the New Generation shares the same footprint and bolt pattern, making it a direct upgrade option for improved thermal performance and reduced noise.

Q: What is the recommended replacement interval?

Inspect every 12,000 km under normal conditions. Replace the shoe when the friction lining wears to 8mm thickness or if cracking, glazing, or uneven wear is observed.

Q: Can this shoe be used with automatic slack adjusters?

Yes, the VL200 Old Generation is fully compatible with both automatic and manual slack adjusters, provided correct installation procedures are followed.

Benzer Ürünler

Zhejiang Bangchi Hakkında

ZHEJIANG BANGCHI OTO YEDEK PARÇA A.Ş. OTO YEDEK PARÇA ÜRETİM SEKTÖRÜNDE UZMAN

Zhejiang Bangchi Auto Parts Co., Ltd. bir Çin VL200 Old Generation Brake Shoe Üreticiler ve Özel VL200 Old Generation Brake Shoe OEM İhracatçısı, Şirket, fren ürünleri sektöründe 20 yılı aşkın deneyime sahiptir. Sıkı yönetim ve IATF 16949 kalite sistemi ile FMSI parça numarası sistemi kurallarına uyarak ürün kalitemizi sürekli iyileştirebiliriz. FMSI standardının amacı, onaylı Sürtünme Malzemeleri Standartları Enstitüsü spesifikasyonlarına dayalı olarak satış sonrası fren parçaları için performans verileri sağlamaktır. Satış sonrası ürünlerinizin de OEM ürünlerinizle aynı kalite standartlarına uyması önemlidir. Örneğin, tüm sürtünme malzemesi bileşenleri aynı parça numaralandırma sistemine uyacak şekilde tasarlanmalıdır. Müşterilerimiz, ürünlerinizi satın almanın ve takmanın tekdüze ve tutarlı olacağından emin olabilirler. Yıllık 3 milyon adetin üzerinde fren balatası kapasitesine sahip olarak, ayrıca çelik fren balataları da sunuyoruz.

onur belgesi

ZHEJIANG BANGCHI OTO YEDEK PARÇA A.Ş. OTO YEDEK PARÇA ÜRETİM SEKTÖRÜNDE UZMAN

Hakkımızda

Fabrikamız

ZHEJIANG BANGCHI OTO YEDEK PARÇA A.Ş. OTO YEDEK PARÇA ÜRETİM SEKTÖRÜNDE UZMAN

Web sitesi menüsü

hızlı Arama

Dil

ESC

Özel VL200 Old Generation Brake Shoe

TÜM ürünler

VL200 Old Generation Brake Shoe